Included in the kit is the main handle section which has a hot shoe mount in front as well as a 15mm rod opening with thumbscrew. Also attached to the front is a 15mm LW rod bracket for adding pass through top rods or our AIR EVF systems. The rear portion of the handle also features a 15mm opening and is clamped down using an M4 screw. 1/4-20 and 3/8-16 mounting points are available on three sides, as well as the ARRI standard accessory mount.
Three extensions, in different lengths and a bend piece, are included to build the handle out further over the lens area, toward the rear, over the module and battery area, and down the back side behind the battery.
Extensions are added easily and securely by inserting at the correct angle aligning the tab and slot, rotating clockwise, and then pushing in again. This multi-action attachment method prevents the extensions from accidentally being removed. Once pushed into place, simply tighten the screw to keep it locked in position.
Weight: 824 g (1.85 lbs)
Dimensions: 100.16 x 196.85 x 476.25 mm (4x 7.75 x 18.75 in)