Teradek, Bolt 4K 1500 TX/RX Deluxe Kit Gold-Mount – TE-10-2110-G

The Bolt 4K 1500 12G-SDI/HDMI Wireless Video Kit from Teradek includes a Bolt 1500 12G-SDI/HDMI wireless transmitter and a Bolt 1500 12G-SDI/HDMI wireless receiver that support video at resolutions up to 4K at 60 fps. They support a line-of-sight range of up to 1500′. The transmitter can send video to up to six receivers and is compatible with any model in the Bolt 4K line. The transmitter features a 12G-SDI input, an HDMI 2.0 input, and a 12G-SDI loop-through output. The receiver features two 12G-SDI inputs and one HDMI 2.0 input. You can remotely pair units, configure settings, and utilize all of Bolt 4K’s features from any iOS smartphone or tablet. The transmitter has mounting holes on each side for the included Gold Mount battery plate so it can be mounted on the back of a camera. Included in the kit are a 3/8″-16 light stand adapter, a hot shoe adapter, two 18″ HDMI cables, two 18″ 2-pin connector to D-Tap cables, a 3′ USB Type-A to micro-USB Type-B cable, two 18″ 12G-SDI BNC cables, a 6′ PSU 2-pin connector to 30W AC adapter cable, nine 2 dBi Wi-Fi 2.4/5.8 GHz antennas, an antenna array, four Bolt 4K wire cover plates, a Bolt 4K TX mounting bracket, a 2-pin connector cable, an XL case that fits a transmitter and four receivers, mounting hardware, and a Wooden Camera ultra arm monitor mount.

Features

– Transmits uncompressed video in 1080p and 2160p at 60 fps with less than 1 ms of delay

– Compliant with the HLG, PQ, and HDR-10 standards

– Send start/stop flags, timecode, and other ancillary data over the wireless link

– Bolt app uses Bolt 4K’s integrated Bluetooth

– Integrated Gold Mount male and female with pass through power and multiple mounting options with 1/4″-20, 3/8″-16, and M3 holes

Specifications

Wireless

Wireless Range

1500′ / 457.2 m

No. of Channels

14

Channel Bandwidth

40 MHz

Frequency Range

Non-DFS Frequencies:

5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz

DFS Frequencies:

5.270 ~ 5.670 GHz

Latency

< 0 sec

RF Power

< 19 dBm

Wi-Fi

5 GHz

Interfaces

Transmitter Antenna Ports

4 x RP-SMA

Receiver Antenna Ports

5 x RP-SMA

Transmitter Video Connectors

1 x BNC (12G-SDI) Input

1 x HDMI (HDMI 2.0) Input

1 x BNC (12G-SDI) Loop Output

Receiver Video Connectors

2 x BNC (12G-SDI) Input

1 x HDMI (HDMI 2.0) Input

HDCP Support

Yes

Embedded Audio

SDI: 2-Channel

 HDMI: 2-Channel

Format Support

Broadcast System Compatibility

NTSC, PAL

Video Format

SDI/BNC:

1080p/DCI 4K 4:2:2 10-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps

1080PsF 4:2:2 10-Bit at 23.98, 24, 25, 29.97, 30 fps

1080i/720p 4:2:2 10-Bit at 50, 59.94, 60 fps

480p 4:2:2 10-Bit at 50 fps

576p 4:2:2 10-Bit at 59.94, 60 fps

576i/480i 4:2:2 10-Bit

HDMI:

1080p/DCI 4K 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 fps

1080PsF 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30 fps

1080i/720p 4:4:4 RGB 8-Bit at 23.98, 24, 25, 29.97, 30 fps

480p 4:4:4 RGB 8-Bit at 50 fps

576p 4:4:4 RGB 8-Bit at 59.94, 60 fps

 576i/480i 4:4:4 RGB 8-Bit

Audio Format

2-Channel 24-Bit 48 kHz PCM Audio

Video Standard Compliance

SMPTE ST-2082-1

Timecode

Yes

LUT Support

17x17x17 3D

Power

Transmitter Built-In Battery

None

Receiver Built-In Battery

None

Transmitter Power Connector

1 x 2-Pin LEMO (6 to 28 VDC) Input

Receiver Power Connector

1 x 2-Pin LEMO (6 to 28 VDC) Input

Transmitter Power Consumption

Device: (18 W)

Receiver Power Consumption

Device: (18 W)

Environmental

Operating Temperature

32 to 104°F / 0 to 40°C

General

Transmitter Mounting

1 x 1/4″-20 Female

2 x M3 Female

Receiver Mounting

1 x 3/8″-16 Female

1 x 1/4″-20 Female

Memory Card Slot

Not Specified by Manufacturer

Materials

Aluminum, PCB

Transmitter Dimensions

5.2 x 3.58 x 1.06″ / 132 x 91 x 27 mm

Receiver Dimensions

4.41 x 5.47 x 1.06″ / 112 x 139 x 27 mm

Transmitter Weight

12.7 oz / 360 g

Receiver Weight

12.7 oz / 360 g