Sachtler Cine 30 Tripod System
The Sachtler 3025 Cine 30 Tripod System consists of the 3006 Cine 30 HD 150mm Fluid Head, 6290 Cine 150 Long Tripod, 7023 Cine Ground-Level Spreader, 3372 Heavy-Duty Front Pan Bar, and the 3060 Side-Load Camera Plate.
Any camera assistant will appreciate the Cine 30 HD 150mm fluid head and its unique side-load sliding camera plate. With the camera fully equipped, mounting and dismounting using the Snap & Go locking mechanism is safe, efficient, and worry-free. Fully compatible with Arri and OConnor camera plates, it features a fine adjustment for a tight secure fit, even if the plate is worn from use. Counterbalance is accomplished with an 18-step selector dial and a high/low range lever for rapid, yet fine-tuned, repeatable setups. Horizontal and vertical drag is governed by a similar 7-step (plus zero) indexed selector system in conjunction with Sachtler’s patented leak-proof frictionless cartridges, which carry a separate five-year warranty. A tilt safety lock guarantees the integrity of the payload until it is secured, and caliper disk brakes ensure reliable pan and tilt fixing during operation with a quick flip of a short-throw lever.
When shooting a project with top-of-the-line production cameras and gear, you need a support system that provides secure and robust stability in all conditions. With the Cine 150 (Long), you get a tripod that is rated at an astonishing 309 lb. It safely supports the payload utilizing reliable, time-proven aluminum alloy metallurgy with dual 35mm leg tubes. Oversized rotary stage clamps ensure easy height adjustments while wearing gloves, and the die-cast 150mm receiver accepts most cine/EFP fluid heads. Used in conjunction with the included 7023 Cine ground-level spreader, payload integrity is assured, and delicate floor surfaces are protected.
The 3025 System 30 is covered by the standard Sachtler three-year warranty, as well as comprehensive worldwide voice and web-based tech support, complete with CAD drawings, manuals, and service bulletins.
Side-Loading Rapid Camera Mount
Snap & Go side-loading mechanism gets heavy camera packages mounted quickly without compromising safety or sliding range, and is also compatible with Arri and OConnor camera plates
18-Step Counterbalance and 7-Step Drag
For rapid setup and repeatable results
Payload Range Selector
Switch between the high and low counterbalance ranges with a flip of the front-mounted Payload Range Selector lever
Caliper Disk Pan and Tilt Locks
Similar to braking systems on trucks or trains, the default position is on, so in case of a system failure, the head will be locked
Illuminated Bubble Level
The Touch Bubble is a self-illuminated spirit level activated through contact, and is powered by three PX625A cells
Optional Assistant’s Box Mount
Using the optional Front Box Adapter, an assistant’s box may be attached to the front of the head without impairing the tilt range
Optional Eyepiece Extension Support Adapter
Provides an anchor point for eyepiece extension rods on the left side of the head
Heavy-Duty Leg Tubes
Oversized aluminum alloy double leg tubes for absolute support integrity
Extra-large rotary stage clamps for ease of use while wearing gloves
Prevents tripod collapse while protecting delicate floor surfaces
Es gibt noch keine Bewertungen.